This detail is perfect for cars that are in good condition but want that new car look inside and out with a swirl and light scratch free deep shine to the paint work. I only use the highest quality natural products which are guaranteed to produce a superb finish. The latest Nano Tech sealants for paint, windows and wheels can also be added at extra cost. These add a crystal clear hard coat to the paint, protecting it from severe element damage e.g. UV rays, brake dust etc while leaving a mirror finish to the paint.
Enhancement Detail (Performed in my detailing studio) : Estimated time: 1 -
- 1. Assess and prepare: I will perform a thorough inspection of the vehicle to check loose trim, minor scratches, dents and any rips or tears in the interior or fresh paintwork.
- 2. Pre-
spray wheels using a non- acidic cleaner to attack brake dust build up and road film, then use a selection of wheel brushes to loosen any stubborn marks followed by a high pressure steam rinse for best results. - 3. Pre-
spray engine compartment, wheel arches, door shuts and lower half of the vehicle with a citrus degreaser, which will attack all road films and oil deposits on the engine. Then rinse off using high pressure steam cleaner for maximum cleaning results. - 4. Cabriolet hood cleaning also performed using a natural fabric cleaner then rinse off with high pressure steam.
- 5. Cover the whole car with a pH-
neutral snow foam, leave to dwell then power wash off using high pressure steam cleaner. - 6. Wash exterior paintwork with a pH-
neutral wash solution using a lambs wool mitt and the 2 bucket method, then rinse off with high pressure steam cleaner. - 7. Hand-
dried using the finest 'deep pile' microfibre drying towels. - 8. Whole car is clay barred using the finest grade clay to remove any contaminants including over-
spray from the paintwork to leave a super smooth surface for polishing. - 9. Perform lustre meter readings to evaluate the paint depth and condition, then perform a single stage paint correction process to remove scratches, swirls etc
- 10. Apply cleaner fluid to door shuts to remove any minor scratches or any tar deposits then apply wax.
- 11. Dress engine to shine and seal from damp. Dress wheel arches to give a natural finish.
- 12. Apply final wax containing a high percentage of carnauba wax to achieve that ultimate shine and protection. (2 applications applied)
- 13. Restore wheels:Using clay bar to remove any contaminants to leave an ultra smooth finish. Apply cleaner fluid to clean and restore to better than original finish. Finally apply a wheel wax containing Teflon to stop brake dust build up and and also give it that ultra deep shine.
- 14. Clean head lining, vinyl and plastic surfaces .
- 15. Clean interior carpets and upholstery using a extraction machine, including boot and bonnet interiors.
- 16. Dress exterior vinyl and rubber trims to give a natural black finish.
- 17. Polish windows and mirrors.
- 18. All chrome and Aluminium surfaces polished.
- 19. Final Inspection
- 20. Delivery
This detail is perfect for show cars and car enthusiasts with cars in any condition but want that new car look inside and out with a 100% swirl and scratch free Ultimate shine to the whole car. The latest Nano Tech sealants for paint, windows and wheels are also included in this detail unless stated otherwise by the customer. These add a crystal clear hard coat to the paint protecting it from severe element damage e.g. UV rays, brake dust etc while leaving a mirror finish. I only use products supplied by Autoshine which have been designed and developed to Autoshine's Master Detailer Tony Spears highest standards. Tony was Swissvax's Head Detailer and trainer for many years before developing his own range of specialist Detailing products. All products are available from my online shop.
Ultimate Detail (Performed in my detailing studio) Estimated time: 2 -
Estimated cost: £500 -
- 1. Asses and prepare: I will perform a thorough inspection of the vehicle to check loose trim, minor scratches, dents and any rips or tears in the interior or fresh paintwork.
- 2. Remove wheels, including spare wheel, to give the insides a thorough clean. (Wheel refurbishment available on request.)
- 3. Pre-
spray wheels using a non- acidic cleaner to attack brake dust build up and road film, then use a selection of wheel brushes to loosen any stubborn marks followed by a high pressure steam rinse for best results. - 4. Pre-
spray engine compartment, wheel arches, door shuts and lower half of the vehicle with a citrus degreaser, which will attack all road films and oil deposits on the engine. Then rinse off using high pressure steam cleaner for maximum cleaning results. - 5. Cabriolet hood cleaning also performed using a natural fabric cleaner then rinse, once dry apply fabric protector then rinse off with high pressure steam.
- 6. Cover the whole car with a pH-
neutral snow foam, leave to dwell then rinse off with high pressure steam. - 7. Wash exterior paintwork with a pH-
neutral wash solution using a lambs wool mitt with the 2 bucket method, then rinse off with high pressure steam. . - 8. Hand-
dried using the finest 'deep pile' microfibre drying towels - 9. Mask up all exterior rubber and plastic trim to protect from Rotary polishing.
- 10. Perform lustre meter readings to evaluate the paint depth and condition, then perform a 5 stage paint correction process to achieve 100% correction.
- 11. Paintwork checked under Halogen and market leading M3 Sun Gun 2 lighting to show whether the paintwork is 100% completely level and free of buffer marks.
- 12. Apply cleaner fluid to door shuts to remove any minor scratches or any tar deposits then apply wax.(Machine polish any deep scratches if required)
- 13. Dress engine to shine and seal from damp. Dress wheel arches to give a natural finish.
- 14. Apply 2 coats of Nano polymer sealant.
- 15. Apply final wax containing a high percentage of carnauba wax to achieve that ultimate shine and protection. (3 applications applied)
- 16. Restore wheels:Using clay bar to remove any contaminants to leave an ultra smooth finish. Apply cleaner fluid to clean and restore to better than original finish. Finally apply a wheel wax containing Teflon to stop brake dust build up and also give it that ultra deep shine. Wheel calipers can be painted and decals added at an extra cost.
- 17. Spray wheel studs,and brake discs, replace wheels and tighten up using a torque wrench.
- 18. Clean head lining ,vinyl and plastic surfaces. Dress plastic optional.
- 19. Clean interior carpets and upholstery using an extraction machine, including boot and bonnet interiors. Apply fabric protector to carpets.
- 20. Clean leather, then apply a leather protector.
- 21. Dress exterior vinyl and rubber trims to give a natural black finish.
- 22. Rain/water repellent window treatment to all exterior windows
- 23. All chrome and Aluminium surfaces polished.
- 24. Dress tyres with a non shiny finish.
- 25. Final Inspection and wipe down
- 26. Delivery